3. Storage Checklist

Transparent Box

• Put Landmark blocks back into the bag
• Put mahjong blocks back into the bag
• Put the small board for mahjong blocks back into the bag
• Stack the calibration board on the top layer
• Make sure the lid is closed

Cables and External Devices

• Put the box back in its original place
• Push the large display back to its original place
• Unplug the HDMI cable and put it back
• Unplug the power cable, roll it up, and put it back inside the robot arm shell
• Put the controller back where it belongs, either on the metal controller holder or another metal area

Robot Arm (Standard Pose)

1. Click ≡ in the top-left corner, then click Settings → Pose Settings, and choose Standard Pose
2. Hold PLAY on the controller until the adjustment is complete
3. Click ≡ again, then click Shutdown; after the warning window appears, click OK to shut down normally